Tile trimmings are an easy way to give your tile work a polished, finished appearance. Do not neglect this essential procedure. Tile trim protects a tile installation from damage, makes cleaning and maintenance easier and extends its lifespan by concealing any rough or sharp edges. The installation of tile edge trim is as simple as the rest of the tile work. To know the ways to pick and install the Tile edge trim, keep reading
Steps To Choosing The Appropriate Tile Trim For The Edges
Get the appropriate measurement against the length of tile you’re using to ensure you have adequate tile trim for your installation. If your tile trim is wider or narrower than your tiles, measure the tile’s outer edge and divide by the trim’s width.
Varieties of Tile Moldings
Tile edges is a thin strip of plastic or metal that comes in a broad variety of shapes and designs to match any tile. In addition, they are available in a number of different coatings, giving you more freedom to get the exact look you desire for your project.
Among the various varieties of tile trim available, today are:
Bullnose
One of the most popular tile trims is the bullnose style. They make the product seem more polished and professional while also preventing injury from sharp corners.
Quarter Round
Quarter-round trimmings are, as the name implies, a circular section one-fourth of the way around. Ideal for use in corners of lavatories, showers, benches, tubs, and doors.
Cove Base
Cove Base prevents water from penetrating through the walls or floors. Thanks to a watertight seal and a rounded edge that conceals the junction invisibly. Therefore, they are most helpful when placed along the floor of showers.
Baseboard
They serve the same purpose as cove base trims and are thus well-suited for usage in damp environments like lavatories and showers. Additionally, tile baseboards are easy to clean and maintain in high-use areas.
How To Install It?
First, take precise measurements of tile edging.
Then, measure the spaces receiving trim before beginning any work to ensure that you order enough linear trim sections of the correct length.
Clamp the trim in place and use a hacksaw to cut it to the correct lengths. When installing trim around a corner, it’s crucial to be precise. Also, create a square or 45-degree section so that the trim pieces line up perfectly.
Examine the assisted gaps to confirm the cutting angle you want to use on your trim.
Make a line on the trim where you want to make the cut, then saw through it, keeping the trim stable and pressing it against the edge of the block the whole time.
Then, when you’ve cut two pieces of trim at right angles to one another, you can test them out against the tile to make sure they fit properly. Finally, you need to let the trimmings dry and set up overnight. After the grout has dried in the spaces between the tiles and the trim, seal the area.
Just as the right tie may put the finishing touch on a sharply fitted suit, the right accessory from Alibaba can provide the finishing touch to your home’s decor. But keep in mind, you should consider both the practicality and aesthetic value of the tile trim details you select.
