How To Make A Freestanding Murphy Bed

0
74
How To Make A Freestanding Murphy Bed

A Murphy bed, also known as a wall bed, pull-down bed, or fold-away bed, is any type of bed that folds down vertically against the wall when not in use. Since space is always at premium in small apartments and houses, murphy beds are  perfect solution to maximize your living area without sacrificing any convenience or comfort when you have guests over. This guide will help you make your own freestanding murphy bed that you can either build yourself or pay someone to do it for you.

The necessary materials

There are many materials that you will need in order to make your own Murphy Bed.

A wooden frame with casters (rolling wheels) attached at the bottom. This is the base of the bed. Wood boards, plywood, or MDF for the headboard and footboard. These pieces should be cut down to size and screwed or nailed together on top of the wooden frame with casters.

A mattress that will fit inside of your headboard footboard pieces. You may also want to purchase some extra fabric if you want a fancier look around the edge of your mattress opening- just be sure it’s not too thick or it won’t fit into your small opening! To know more check on bedroom ideas for women.

First steps

Murphy beds are great for people who live in smaller apartments or homes, as they take up less room than other types of beds. They are also much easier to clean, as you can remove the mattress and replace it with the desk when not in use. However, there is no need to get rid of your current bed if you don’t want to.

You can buy an under-bed storage unit that will allow you to place your desk on top of the storage unit when not in use. This way, your bedroom will be free from clutter and everything will be out of sight! Once you’ve found the right bed for you, tailor it with new soft bed sheets¬†to make it beautiful.

Second steps

What is the second step in making a Murphy bed? You will need to decide what kind of Murphy Bed you would like. There are three main types of Murphy Beds: Standard, Platform, and Loft. Standard Murphy Beds have no headboard or footboard and are usually used for office space.

Platform beds do not require any foundation because they rest on the floor but can be high enough for standing up in. Loft beds are designed as sitting areas with an additional sleeping area above. The next step is figuring out the dimensions of your bed.

Working with the end in mind

Murphy beds are designed to be folded into the wall during the day, when they’re not in use. Murphy beds usually consist of two pieces: one that is mounted on the wall or ceiling and one that’s used as a mattress. The top piece (the wall mounted piece) has hinges on one side and a crank on the other side.

When you pull down on the crank, it causes the hinged side of the frame to fold up against itself. Then, you simply push it back up when you need it again.

If you’re going to install your own murphy bed, there are some things you’ll need to consider before beginning your project: what type of hinge mechanism does your frame have? Do you want it flush with your walls or raised off?

Finish it up!

A Murphy Bed is perfect for small spaces. It folds up and stows away in a closet, so it doesn’t take up much space at all! When the Murphy Bed is open, it takes up the same amount of floor space as a queen size bed. The best part is that they’re super easy to build. Here’s how:

Measure and mark where you want your supports to go on the wall with pencil (you’ll be attaching them later). Your supports should be 1 foot from the edge of the wall, 3 feet apart, and 2 feet off the ground. Attach them using long screws or metal brackets screwed into studs in the wall.

Optional extras

In order to make a freestanding Murphy Bed, you will need the following materials:

  1. Plywood sheets (You will need six sheets, each sized at 4 ft by 8 ft)
  2. Wood screws (You will need 30-inch screws and one inch screws)
  3. 2X4’s (you’ll need two 2x4s cut at 6ft long and two 2x4s cut at 4 ft long)
  4. Sheets of plywood (It doesn’t matter what size the sheet is as long as it fits over your frame)
  5. Wood bolts with washers (you will need four wood bolts with washers that are 1 in length and 8 in length)

LEAVE A REPLY

Please enter your comment!
Please enter your name here